 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HIGH ISOLATION VOLTAGE AC INPUT DARLINGTON TRANSISTOR TYPE SOP OPTOCOUPLER FEATURES * HIGH ISOLATION VOLTAGE BV: 2500 kVr.m.s. * SMALL THIN PACKAGE 4, 16 pin SOP, pin pitch 1.27 mm * AC INPUT RESPONSE * HIGH CURRENT TRANSFER RATIO CTR = 2000% TYP @ IF = 1 mA, VCE = 2 V * AVAILABLE IN TAPE AND REEL PS2806-1-F3, PS2806-4-F3 PS2806-1 PS2806-4 DESCRIPTION PS2806-1 and PS2806-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon Darlington-connected phototransistor in a plastic SOP (Small Out-Line Package) for high density applications. This device has a shield effect to cut off ambient light. APPLICATIONS * PROGRAMMABLE LOGIC CONTROLLERS * MEASURING INSTRUMENTS * HYBRID IC ELECTRICAL CHARACTERISTICS (TA = 25C) PART NUMBER SYMBOLS PARAMETERS Forward Voltage, IF = 5 mA Terminal Capacitance, V = 0, f = 1 MHz Collector to Emitter Dark Current VCE = 40 V, IF = 0 Current Transfer Ratio, (IC/IF) IF = 1 mA, VCE = 2 V CTR Ratio1, IF = 1 mA, VCE = 2 V Collector Saturation Voltage, IF = 1 mA, IC = 2 mA Isolation Resistance, Vin-out = 1.0 k VDC Isolation Capacitance, V = 0, f = 1 MHz Rise Time2, VCC = 5 V, IC = 2 mA, RL = 100 Fall Time2, VCC = 5 V, IC = 2 mA, RL = 100 UNITS V pF nA % % V pF s s 2. Test Circuit for Switching Time IF PS2806-1, PS2806-4 MIN TYP 1.1 30 400 200 0.3 1011 0.4 200 200 2000 1.0 3.0 1.0 MAX 1.4 TranDiode sistor VF Ct ICEO CTR CTR1/CTR2 VCE(sat) RI-O CI-O tr tf 1. CTR1 = IC1 , CTR2 = IC2 IF1 IF2 IF1 IC1 VCE IC2 IF2 Coupled PULSE INPUT VCC ( PW = 1 ms Duty cycle =1/10 ) VOUT 50 RL = 100 43 16 15 14 13 12 11 10 9 12 PS2806-1 1 2345 PS2806-4 678 California Eastern Laboratories PS2806-1, PS2806-4 ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) SYMBOLS Diode IF PD/C PD IF(Peak) Transistor VCEO VECO IC PC/C PC Coupled BV TOP TSTG PARAMETERS UNITS RATINGS PS2806-1 PS2806-4 50 50 0.6 0.8 60 80 1 1 ORDERING INFORMATION PART NUMBER PS2806-1 PS2806-1-F3 PS2806-1-F4 PS2806-4 PS2806-4-F3 PS2806-4-F4 16-Pin SOP Magazine case 45 pcs Embossed Tape 2500 pcs/reel PACKAGE 4-Pin SOP PACKING STYLE 50 pcs (Tape 50 pcs cut) Embossed Tape 3500 pcs/reel Forward Current mA Power Dissipation Derating mW/C Power Dissipation mW/Ch Forward Current A PW = 100 s, Duty Cycle 1% Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage2 Operating Temperature Storage Temperature V V mA/Ch mW/C mW/Ch Vr.m.s. C C 40 6 90 1.2 120 40 6 100 1.2 120 2500 -55 to +100 -55 to +150 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output. OUTLINE DIMENSIONS (Units in mm) PS2806-1 PS2806-4 Top View 4 3 Top View 16 15 14 13 12 11 10 9 2.70.3 43 10.30.3 1. 2. 3. 4. Anode, Cathode Cathode, Anode Emitter Collector 16 9 1 2 3 4 5 6 7 8 1 2 0.15+0.10 -0.05 1 2.0 2.3 MAX 0.63 MAX 2 0.10.1 7.00.3 4.4 1 8 1, 3, 5, 7. 2, 4, 6, 8. 9, 11, 13, 15. 10, 12, 14, 16. Anode, Cathode Cathode, Anode Emitter Collector 1.3 2.3 MAX 2.0 0.15 -0.05 +0.10 7.0 0.3 4.4 1.3 0.50.3 1.27 0.40.10 0.12 M 0.1 0.1 1.27 0.40 -0.05 +0.10 0.63 MAX 0.12 M 0.5 0.3 MARKINGS PS2806-1 PS2806-4 NEC PS2806-4 N 003 No. 1 pin mark Country Assembled Type Number Assembly lot 6 003 Assembly lot Last number of type No.: 6 0 03 Week Assembled Year Assembled (Last 1 Digit) N 0 03 Week Assembled Year Assembled (last 1 digit) CTR Rank Code PS2806-1, PS2806-4 TYPICAL PERFORMANCE CURVES (TA = 25 C) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE 100 120 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation, PC (mW) Diode Power Dissipation, PD (mW) 80 PS2806-4 0.8 mW/C PS2806-1 0.6 mW/C 40 100 1.2 mW/C 80 60 60 40 20 20 0 25 50 75 100 0 25 50 75 100 Ambient Temperature, TA (C) Ambient Temperature, TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 FORWARD CURRENT vs. FORWARD VOLTAGE 80 60 Forward Current, IF (mA) 10 5 100 C 60 C 25 C 0 C -25 C -55 C Forward Current, IF (mA) 40 20 0 -20 -40 -60 1 0.5 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 -80 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 Forward Voltage, VF (V) Forward Voltage, VF (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 200 10 mA 100 Collector to Emitter Dark Current, ICEO (nA) 10000 Collector Current, IC (mA) 1000 VCE = 40 V VCE = 24 V VCE = 10 V VCE = 5 V VCE = 2 V 5 mA 50 1 mA 10 5 0.2 mA 1 0.5 IF = 0.1 mA 0.5 mA 100 10 1 -50 -25 0 25 50 75 100 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Ambient Temperature, TA (C) Collector Saturation Voltage, VCE (sat) (V) PS2806-1, PS2806-4 TYPICAL PERFORMANCE CURVES (TA = 25 C) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio,CTR 160 5 mA 140 1.4 Normalized to 1.0 at TA = 25 C IF = 1 mA VCE = 2 V 1.2 1.0 0.8 0.6 0.4 Collector Current, IC (mA) 120 100 80 2 mA 60 40 1 mA 20 IF = 0.5 mA 2 4 6 8 10 0.2 0 -50 -25 0 25 50 75 100 Collector to Emitter Voltage, VCE (V) Ambient Temperature, TA (C) CURRENT TRANSFER RATIO (CTR) vs. FORWARD CURRENT 8000 VCE = 2 V CURRENT TRANSFER RATIO vs. FORWARD CURRENT 3000 VCE = 2 V Current Transfer Ratio, CTR (%) 7000 6000 5000 4000 3000 2000 1000 0 Sample A B C D Current Transfer Ratio, CTR (%) 2500 2000 1500 Sample A B C D 1000 500 0.1 0.5 1 5 10 30 0 10 50 100 500 Forward Current, IF (mA) Forward Current, IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 10000 VCC = 5 V IC = 2 mA CTR = 1910 % SWITCHING TIME vs. LOAD RESISTANCE 10000 VCC = 5 V IF = 1 mA CTR = 1910% tf Switching Time, t (s) tf tr Switching Time, t (s) 1000 1000 ts 100 tr 100 ts td 10 10 td 1 0.1 0.5 1.0 5.0 1 0.1 1 10 100 Load Resistance, RL (k) Load Resistance, RL (k) PS2806-1, PS2806-4 TYPICAL PERFORMANCE CURVES (TA = 25 C) FREQUENCY RESPONSE 1.2 IF = 1 mA VCE = 2 V 0 LONG TERM CTR DEGRADATION IF = 1 mA (TYP.) 1.0 CTR (Relative Value) Voltage Gain, AV (dB) TA = 25 C 0.8 -5 -10 0.6 TA = 60 C -15 RL = 100 0.4 -20 0.2 0.2 0.5 1 2 5 10 20 50 100 200 0 10 102 103 104 105 106 Frequency, f (kHz) Time, (Hr) PROGRAMMABLE LOGIC CONTROLLER EXAMPLE Purpose: In-out interface Xaxis Ya xi s Servo Motor Servo Motor Sensor Amplifier Motor Controller Heater Controller Pulse Generator Controller COM PS2806-1 PS2806-4 PD4050 AC, DC Servo Motor Driver Unit M TG PG Pulse Motor Driver Unit M CRT Terminal 1 Computer PC Terminal 2 Printer Power Supply Programmable Logic Controller Printer FDD Memory Cassette Controller PS2806-1, PS2806-4 TAPING SPECIFICATIONS (Units in mm) TAPE OUTLINE AND DIMENSIONS 2.0 0.1 4.0 0.1 o1.5 0.1 1.75 0.1 2.8 MAX 16.0 0.3 7.5 0.1 7.55 0.1 0.3 2.30.1 1.55 0.1 4.0 0.1 2.85 0.1 TAPE DIRECTION PS2806-1-F3 PS2806-1-F4 6003 6003 6003 6003 REEL OUTLINE DIMENSIONS 6003 6003 R 1.0 21.0 0.8 1005.0 330 Packing: 3500 pcs/Reel 6003 6003 6003 6003 2.5 2.0 0.5 13.0 0.5 16.4- 0.0 +2.0 PS2806-1, PS2806-4 TAPING SPECIFICATIONS (Units in mm) TAPE OUTLINE AND DIMENSIONS 1.75 0.1 2.0 0.1 4.0 0.1 2.8 MAX 1.55 0.05 7.5 0.1 16.0 0.3 0.3 1.55 0.1 8.3 0.1 12.0 0.1 TAPE DIRECTION PS2806-4-F3 PS2806-4-F4 REEL OUTLINE DIMENSIONS 10.7 0.1 2.5 2.0 0.5 13.0 0.5 1005.0 R 1.0 21.0 0.8 330 16.4- 0.0 +2.0 Packing: 2500 ppcs/reel PS2806-1, PS2806-4 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature * Time of temperature higher than 210 C * Number of reflows * Flux 235 C (package surface temperature) 30 seconds or less Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended). Package Surface Temperature T (C) (heating) to 10 s 235 C (peak temperature) 210 C to 30 s 100 to 160 C 60 to 120 s (preheating) Time (s) (2) Dip soldering * Temperature * Time * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended). (3) Cautions * Fluxes Avoid removing the residual flux with chlorine-based cleaning solvent after a reflow process. CAUTIONS REGARDING NOISE Be aware that when voltage is applied suddenly between the photocoupler's input and output or between corrector-emitters at start-up, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR NEC RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 DATA SUBJECT TO CHANGE WITHOUT NOTICE Internet: http://WWW.CEL.COM 02/06/2002 |
Price & Availability of PS2806-4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |